Brilla machine fleet

Cutting, Folding, Forming, Roll-forming, Bending, Punching, Welding for large size dimensions sheet metal at Brilla metalworks (Rhône-Alpes)

Sheet metal cutting

- COLLY 4000 x 12 Shear with gooseneck of 400 and slitting roller (digital program).
-FMB semi-automatic band saw Ø 406 for straight cut,  420 x 240 at 90°,  240 x 260 at 45°,  180 x 130 at 60°,
Ø 180 at 60° with 3 ml stop with digital display and numerical program.
- AMADA Notcher with variable angle (200 thickness 6).
- TRUMPF Bevelling machine (CH 10 X10) thickness 4 to 40 angle from 20° to 55°.
- Sagop B4000 Bevelling machine sheet metal thickness minimum 5
   Bevelling angle from 15 to 45°
- Sagop B6 Bevelling machine thickness from 3 to 16
- Sagop B12 Bevelling machine thickness from 6 to 40
- GF Machine for cutting thin tubes up to 114.

Sheet metal cutting

- AMADA 4200 X 400T brake press, 8 digital axes 660 opening.
- AMADA 3000 x 125 T brake press, 4 digital axes with :
* Sectioned dies (radius 0.6 to 6) +special clamps for radiusing
* V-die from 8 to 125 + V-die from 160 to 320 for thick sheet metal pre-bending + suitable knives.
* Equipment for folding at 45° until 12 min and at 30° until 2 min.
- AMADA 25 T Press Brake 1.2 ml.
- 100 T Press Brake for stamping and straightening out.

Cone roll forming

- [NEW] Specific machines :
Length 2050 maximum Ø 55 minimum.
Length 660 maximum Ø 50 minimum.
Length 550 maximum Ø 30 minimum digital.
Call us for more information.

Sheet metal roll-forming

- Digital Picot 3000 x 30 bending roll (pre-bending machine).
- Digital Picot 3000 x 12 bending roll (pre-bending machine).
- Digital PICOT 3000 x 4 bending roll (pre-bending machine) digital display on the two lower rollers.
- Digital lg 2200 bending roll with inter-changeable roller (Diam-170-150-120-105) (pre-bending machine).
- Digital PICOT 2000 x 10 bending roll (pre-bending machine) digital display on the the two lower rollers.
- Digital Picot 2000 x 8 bending roll (pre-bending machine).
- Picot 1500 x 2 bending roll (pre-bending machine).
- Picot 950 x 2 bending roll (pre-bending machine).
- Picot 610 x 0.8 bending roll (pre-bending machine).
- Picot 400 x 1 bending roll (pre-bending machine).
- Picot 305 x 1 bending roll (pre-bending machine).

Tube bending

- PICOT Bending machine with rollers
(square of maximum 30 for a Ø 600 minimum).
- MINGORI Electric bending machine with stop
(Ø 60.3 thickness 6 min maximum).
- Mingori Manual bending machine 2 machines
(1 machine diameter 60.3 and 1 machine diameter 88.9).
- REMS Bending machine diameter 10 to diameter 30 possibility of elbow 180°.

General mechanical Equipment

- AMC Parallel lathe Ø 400 x 1600
- DUFOUR milling machine, 3 axes 700 x 300 x 500
- CINCINNATI Drill Ø maxi 23
- Column drill Ø 50
- Radial drill
- Sydéric drill bench, Ø 23 drill, flow-drilling, tapping machine M 12.
- REMS threading lathe for 1/4 to 4 inch tubes into the broach (stainless steel combs).
- Magnetic support diameter 34
- Magnetic support for tapping from M4 to M12 and drilling up to 35 with a milling cutter.

Welding

- 3 TIG stations (maximum capacity: SAF Nertabloc TR 450 Amp pulsed Aluminium and Stainless Steel ).
- 6 MIG stations (maximum capacity: SAFMIG 480 Amp TRS pulsed )
- 4 ARC stations (maximum capacity: 400 AMP rotating)
- 2 autonomous units.
- 3 Polysoude orbital welding heads Ø 8 ext to Ø 115 ext (PS 204 generator with cooler and 16 program memory card) TIG welding torch adjustable to 45° for welding tees, branch connections or flanges.

Drawing

P3D Drawing program
and sheet metal development program
( TOP Solid Missier ).